Sale!

WD 6TB Red 5400 rpm SATA III 3.5″ Internal NAS HDD

Original price was: KSh 23,000.00.Current price is: KSh 21,000.00.

Category: Storage Devices

Description

WD 6TB Red 5400 rpm SATA III 3.5″ Internal NAS HDD

WD 6TB NAS HDD

Key Specs ;

6TB Storage Capacity
3.5″ Form Factor
SATA III 6 Gb/s Interface
128MB Cache

Buy WD 6TB Red 5400 rpm SATA III 3.5″ Internal NAS HDD (WD60EFAX)

The 6TB Red 5400 rpm SATA III 3.5″Internal NAS HDD Retail Kit from WD is a mainstream option for SoHo (Small Office and Home Office) applications in 1- to 8-bay systems with load to moderate workloads and extended idle times, excluding ZFS.

Engineered to handle increased workloads, this 6TB drive operates using a SATA III 6 Gb/s interface, a 256MB cache, and a rotational speed of 5400 rpm, all of which help to ensure uninterrupted data transfers with a sustained rate of up to 180 MB/s.

This drive also features high levels of reliability, with 600,000 load/unload cycles, <1 in 10¹⁴ non-recoverable read errors per bits read, error recovery controls, and 1,000,000 hours MTBF for 1-8 bay NAS systems.

Also built into this drive are noise and vibration protection and WD’s NASware 3.0 helps increase system compatibility, allowing WD Red drives to be more easily integrated with your existing network infrastructure.

General Features

Built for 1 to 8-bay NAS systems, WD Red lets users store their data in one unit

NASware 3.0 Technology

Built into every WD Red hard drive, NASware 3.0’s technology helps improves your system’s storage performance by increasing compatibility, integration, upgradeability, and reliability

Built for NAS Compatibility

Desktop drives aren’t purpose-built for NAS, but WD Red drives with NASware are. WD’s technology helps takes the guesswork out of selecting a drive. WD Red is for small NAS systems and WD’s algorithm balances performance and reliability in NAS and RAID environments

Desktop Drives vs. WD Red

Desktop hard drives are not designed for NAS environments. Do right by your NAS and choose a drive with an array of features to help preserve your data and maintain optimum performance. Take the following into consideration when choosing a hard drive for your NAS:

Compatibility: Without being tested for compatibility with your NAS system, improved performance is not guaranteed
Reliability: The always-on environment of a NAS or RAID is a hot one and desktop drives aren’t typically tested in those conditions. WD Red is
Error Recovery Controls: WD Red NAS hard drives are specifically designed with RAID error recovery control to help reduce failures within the NAS system. Desktop drives are not typically designed for RAID environments where this can be an issue
Noise and Vibration Protection: Designed to operate solo, desktop drives offer little or no protection from the noise and vibration faced in a multi-drive system. WD Red drives are designed for multi-bay NAS systems

WD Red for Home

Stream, backup, share and organize your digital content at home with a NAS and WD Red drives designed to share content to the devices in your home. Red NASware helps increase your drives’ compatibility with your devices, TV, stereo, and more

WD Red for Small Business

WD Red is a good hard drive choice for 1 to 8-bay systems. NASware 3.0 allows for integration with your existing network so WD Red can share and backup files at the speed of your business. For larger businesses with up to 16 bays, use WD Red Pro

3D Active Balance Plus

This helps ensure your data is protected from excessive vibration and noise in a NAS or RAID environment. This dual-plane balance control helps reduce the degradation of your drive over time

Reliability

Since your NAS system is always on, a reliable drive is essential. With an MTBF of up to 1 million hours, the WD Red drive with NASware 3.0 is designed for 24×7 environments

Cooler Operations

By reducing power consumption, the operating temperature of your NAS stays cooler. With a lower temperature in your system, you can create a more reliable solution for your NAS

Reviews (0)